Community forums

PIXHAWK 3 PRO


About the PIXHAWK 3 PRO category (1)
Autopilot mount (2)
Pixhawk/ Xbee telemetry (10)
Servo connection (9)
How to connect GPS to another TELEM port (3)
Magnetometer calibration fails on Pixhawk Pro 3 (2)
Can I use XL RTK GPS module with Pixhawk 1? (14)
Safety switch px3 PRO (5)
Démarrage moteur après armement (2)
Pixhawk pro Battery monitor (1)
Drotek PMU support in MissionPlanner (1)
Mounting the Pixhawk 3 Pro (6)
How to incorporate different baud rate to start Pixhawk using Telemetry (1)
Using Telem 3/4 for MAVlink (2)
Pixhawk 3 Pro Specifications (4)
No way to calibrate sensor using qgroundcontrol on android (2)
Interfacing an other GPS (1)
Paramètres QGC impossible à modifier (1)
Pixhawk 3 Pro, No Power (2)
Mounting orientation (2)
Using all UART ports simultaneously (7)
3 PRO ready RTK GPS Kit default parameters request (1)
-1:MC_ROLL_TC is missing (2)
RC calibration with Pixhawk 3 pro and taranis Tx (4)
Unable to connect sik radio to pixhawk 3 pro (4)
Telemetry problems with tiny Module power (6)
FrSky Telemetry with Pixhawk3 Pro? (9)
Safety switch with all-in-one module (4)
Arduplane 3.8.0 supports Drotek px4pro board ( 2 ) (28)
Number of async serial ports on Pixhawk3 Pro? (7)