Community forums

10DOF IMU (MPU9250 and MS5611) address selection

Hello everybody

I bought this IMU to replace an older one (MPU6050+HMxx83+MS5611) with fixed I2C addresses, like e.g. 117.

Now, the MPU9250+MS5611 features selectable addresses. It can be done by soldering two footprints, either one for the MPU and the baro.
What is the actual address that you get by this? Just 0 and 1 ?

Thx for advice
Constantin

ADDRESS 0 = GND
ADRESS 1 = VDD
You can find all schematics on the page of the product.