Dropix / Arducopter channel management

Hi there :wink:

I just scratched the surface of copter 3.3, but I can’t seem to find a way to have multiple flight mode to the channel 7 to 12, like what is possible with the channel 5, where different PMW values assign different flight mode.

On the 5th channel, I tried to mix two switches or thinking about modifying my Taranis to get a 6 positions switch, but I don’t find those solutions ergonomic.

I also would like to know, if it’s possible tu use my CH15 and 16 to modify my flight mode or turning on/off my lidar for exemple.

Thanks

Ben

If you do not like two switch mixer there is an hardware solution , a rotary switch for Taranis with several positions.

With Dropix / Pixhawk you can handle the Rc Aux with the pass through option but remember you can control only one relay output from you radio .