Galileo Ublox NEO-M8N GPS

i’ve a USV equipped with Pixhawk and GPS module Drotek.

With software ublox center it’s possible to set Neo-M8N to use only GNSS Galileo to navigation?

Thanks for your help :slight_smile:


Yes it is possible, on U-Center -> Configuration View -> GNSS you can select the constellations you want to receive. However it is quite unlikely that you are able to have a solution only with Galileo satellites (you need at least 4 satellites with correct signal strength in order to obtain a 3D fix).

1 Like

thanks for your help.

Great :grinning: I managed to hook four Galileo satellites.
I obtained a 3D fix with a HDOP: 2.9. I was surrounded of trees and buildings.

Great! :slight_smile: