How to interface with PX3 pro using NSH

Hi everyone,

Does anybody know how to interface with Pixhawk 3 Pro using NSH? I did that for Pixhawk 2 and 1 but really couldn’t find how to do that on Pixhawk 3.

Hi,

You can use the same port than Pixhawk 2. :wink:

The two debug ports are the ones on the side of the board, with JST connectors instead of JST-GH. One is for the FMU processor (STM32F469) and the other one is for the IO processor (STM32F1).