NEO-M8P with active trimble antenna (AG15)

NEO-M8P RTK
#1

Hi, I have severals receivers betwen them a dual frequency base station, this base station generates corrections on three formats, (CMR+, RTCMV3 and RTCA). I want test the NEO-M8P with an AG-15 Trimble L1 GPS antenna, this antenna is active and uses 5 v for its working. The NEO-M8P work with 5V LNA DC bias voltage?

Regards from Mexico.

#2

Hello,

The supply voltage of the antenna matches the supply voltage of the receiver. In Drotek’s boards, all GPS chips have a 3.3V power supply, so in your case you should use a different power supply.