Pixhawk 3 Pro Redundant microcontroller

Hello, I am quite interested in the Pixhawk 3 pro, however i’m not able to see wether or not the Pixhawk 3 pro has a redundant microcontroller onboard?

Best regards,
Christoffer

Yes sure. You can follow our docs here https://pixhawk.drotek.com/en/introduction.html please.

"FMUv4-PRO continues the PX4FMU+PX4IO architecture from the previous generation, incorporating the two functional blocks in a single physical module. "
“PWM Outputs:
Eight PWM outputs are connected to IO and can be controlled by IO directly via R/C input and onboard mixing even if FMU is not active (failsafe / manual mode).”