Rover location from Base station

I’m trying to setup my base - rover setup in that way, that standalone rover with telemetry. Is there a way to get rover position in u-center using usb connection to base station? I can only get rover position with direct usb connection, but i would like to extract it from base station with telemetry connection to rover.
Can You provide any hints for such setup?

1 Like

Configure the F9P to output RTCM on port TX1.
The F9P Rover configuration only outputs NMEA ($GPGGA and $GPRMC) on the TX1 .
Configure the F9P Rover to accept RTCM messages on the RX2 port.

You can use 2 way Radio receiver or ESPrtk to pass the data and connect them like this.