USB Driver for Ublox NEO-M8N GPS + HMC5983 compass (XL)

Hello,

bought the Ublox NEO-M8N GPS + HMC5983 compass (XL).

I’m using Windows 10 and can’t connect the receiver over USB.
Windows told me no driver to be installed.

I read the paper to install driver from ublox.
I’ve been looking at ublox and install any kind of Driver I can found for the m8n.
But no Driver is running.

Which driver I have to install and which way is todo?

Best gegards

Problem solved. It was on the USB cable.
Thanks for the help.

Hello, I’ll post another customer’s solution (credits to John Githens) :

  1. Click here to download v8.24 software for Windows.
  2. Unzip (Extract All) the 'ublox-GNSS_u-center_windows_v8.24 'file.
  3. Complete the install procedure.
  4. Plug in the module using a USB cable.
  5. If you allowed Windows to install or update the driver via the Internet, then discover Device Manager on your machine.
  6. In Device Manager, you should see a line item with the word ‘Sensors’. Double-click the sub-item referring to the u-blox GNSS receiver. Use the Rollback button/function. (Note: From now on, you will not see the device appear in Device Manager, however you can see the existence of a live Port to the module under ‘Ports’.)
  7. Open the u-center app and click the button on the far left, on the lower menu row (there will not be a popup to explain the button). You should see a COM port appear in the list, and data passing from the module should appear.